FIELDS OF USE
LIDO is odourless and therefore particularly recommended for indoor or inhabited environments. With its excellent expansion and adhesion and a pleasing aesthetic effect, LIDO is particularly suitable for fine finishes on rigid PVC, galvanized sheet metal, aluminium, fibre cement, new or already painted wood or ferrous metals.
APPLICATION
Mix thoroughly. Apply only to dry surfaces, at temperatures above 15° and a relative humidity of less than 70%.
On new ferrous metals: apply two coats of Inoxidol rust inhibitor and then apply two coats of LIDO, crossing the brush strokes. On already painted ferrous metals: remove any rust or loose paint, then proceed as for new metal. On new wood: apply two coats of Marinite, sand and then apply two coats of LIDO, crossing the brush strokes. On already painted or stained wood: sand to remove any loose areas, fill if necessary and then proceed as for new wood. On PVC, galvanized metal, aluminium and surfaces that have already been painted, simply degrease and clean the surfaces to be treated and apply two coats of LIDO.
It can be applied by brush or roller as is or diluted 5-10% with water; for spray application dilute 15-20%. Protect from frost. Store at +5°C minimum.
